Before you always start working, make sure that you will work at a
suitable height. First make sure that the bench vice set at the correct
height for you. The right height for you. The right height is about four
fingers below your elbow, as shown in figures. If the vice is too high,
you will tire quickly because you will be working at an uncomfortable
height. If the bench vice is too small, you will put needless strain on
your back because you will have to bend forward.
Related Searches @ Bench Vice
Another figure shows how you should stand. Make sure that you always stand comfortably, with your feet apart. When you are filing or sawing, make use of the full stroke of your hacksaw or file. Make sure that your arm movement is in line with the cutting tool's direction of movement to prevent cutting skew.
Safety, Maintenance, Care and Storage
Guidelines for the safe use, care and storage of a bench vice are:
Never grind the jaws of a bench vice, because this could damage them, and they will not hold workpieces securely.
When Striking a workpiece in a bench vice with a large hammer, direct
your blows towards the fixed jaw. Otherwise, the nut and spindle of the
bench vice could be damaged.
Never hit the handle of a bench vice with a hammer. This will damage the nut and handle, and you will not be able to tighten it adequately.
Do not extend the handle with a pipe to put more force on the handle. This will only bend the handle.
When a bench vice is not in use, remove objects from it to release the tension from the spindle.
Take care of the bench vice by greasing the spindle once a year with good-quality grease.
Learning activity, More to Visit @ http://toolzonline.com/
 |
| The Correct Height for a Bench Vice |
Another figure shows how you should stand. Make sure that you always stand comfortably, with your feet apart. When you are filing or sawing, make use of the full stroke of your hacksaw or file. Make sure that your arm movement is in line with the cutting tool's direction of movement to prevent cutting skew.
Safety, Maintenance, Care and Storage
Guidelines for the safe use, care and storage of a bench vice are:
Never grind the jaws of a bench vice, because this could damage them, and they will not hold workpieces securely.
 |
| The Correct Position of the Feet When Filling or Sawing |
Never hit the handle of a bench vice with a hammer. This will damage the nut and handle, and you will not be able to tighten it adequately.
Do not extend the handle with a pipe to put more force on the handle. This will only bend the handle.
When a bench vice is not in use, remove objects from it to release the tension from the spindle.
Take care of the bench vice by greasing the spindle once a year with good-quality grease.
Learning activity, More to Visit @ http://toolzonline.com/
Bench Vice Usage Informations
Reviewed by Toolz Online
on
00:59
Rating:
Reviewed by Toolz Online
on
00:59
Rating:
No comments:
Post a Comment